Medium Density Fiberboard (MDF) is a composite product panel manufactured from wood fibers and synthetic resin binders bonded together under heat and pressure. The fibers and resin form a homogenous board with consistent properties in each direction.

MDF is an exceptional product for mouldings and millwork. The surface is flat, smooth, uniform and free of knots and grain. MDF is easily shaped into almost any form. High quality, clean, sharp contours and edges can be achieved in a wide range of profiles.

The homogeneous composition of MDF is compatible for high quality finishing techniques. MDF's uniform composition and smooth, tight surface, allows finishes to be applied directly to the surface. There are no finger joints so it is easy to create an even finish.

MDF mouldings and millwork are easy to work with at the job-site.

MDF mouldings are available with veneer, paper or other overlays. Special machines wrap the veneer or overlay over the profile. Grain printed and prefinished MDF mouldings are also available. Each provides the same ease of installation as standard MDF mouldings.

Application and Uses:

MDF millwork is available as casing, crown, jambs, baseboard, chair rails and many other profiles.

Mouldings are commonly available in 5.4 lengths.

Most MDF moulding and millwork comes pre-primed. Veneer wrapped or pre-finished.

MDF products are available when stain finishes are needed. MDF mouldings are intended for interior use only, unless otherwise recommended

Exterior Use of MDF:

Not recommended.